The »Grass Flocking Templates« are a small but excellent innovation!
As soon as you have them in your hands, you wonder why they never existed before! You can easily design partially covered areas with the templates. This results in edges, tufts, strips, areas and various patches of grass.
You can use the templates in two ways: either apply »Grass Glue« onto the substrate first, loosely hold the template over it and then flock through the gap onto the wet glue or you can spray »Spray Glue “Haftfix”« onto a surface using a template resting on the substrate. You can then flock without holding the template. Individual gaps in the templates can be blocked with masking tape.
Again, dare to experiment!
| Contents: | |
| Packaging Unit: | 1 Piece/Pieces |
A surface that has already had »Grass Glue« applied to it is flocked using a Grass Flocking Template. As a result, individual spots, surfaces and areas can be targeted for flocking with one type of fibre.
In combination with the »Spray Glue “Haftfix”« , you can use the »Grass Flocking Template« for masking surfaces.
Note that the templates must be regularly replaced when they are used in this way.
The individual templates each have several slots and shapes. You can block individual openings with masking tape from a DIY store. Use only very slightly sticky masking tape.
5 different templates
