This special point motor is a powerful and quiet unit with integrated decoder. Useable for Marklin-C and Trix-C track system turnouts. Decoder is mounted as component inside the cable so the drive is very compact.. Extraordinary and very realistic slow movement of the point rails. Speed and motion are controlled by the built-in electronic which warrants a very sensitive adjustment. If - due to the characteristics of your turnout- the direction of the turnout doesn`t fit with the switching direction of the digital command station, it is possible to set the drive motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations, e.g. Viessmann Commander item-No. 5300. Analogue mode is possible too. Additional switching outputs for a conventional feedback and core polarization complete the functions. Functions are configurable. Point can be mounted in the following Marklin-C turnouts (road bet point).24611 left turnout 188,3 mm / R2 = 437,5 mm / 24,3. Manual. 24612 right turnout 188,3 mm / R 2 = 437,5 mm / 24,3 . Manual. 24612 right turnout 188,3 mm / R2 = 437,5 mm / 24,3. Manual.24624 double Slip Switch 188,3 mm / 24,3. With electric mechanism and lighted double slip switch lantern.24630 three way turnout (2.pieces drives) length 188,3 mm/2 x 24,3.20671 left curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 30. Outer curve: 30 with the parallel curve spacing of 77,5 mm.20672 right curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 30. Outer curve: 30. 24711 Slim left turnout length 236,1 mm. Double turnout radius 1114,6 mm. Track curve 12,1. Core polarization 10 metal.