Please Note: Our KM1 Modellbau images may only show a representative model of a class/series. Please check the product description for actual color, era, details and other options for each stock number. Please contact us before ordering if you have any questions.
The system provides control 7 of the beginning of the powerful ones start to the track one hobby. You can lie back and relax, because you have from the beginning, everything you need: 7A performance, dual cab for the simultaneous control of two locomotives, solenoid control, route control, S88 feedback, LocoNet, infrared receiver for wireless remote control (IRIS) comprehensive full function keys, backlit keyboard for night operation, it clearly readable, full graphic display with backlight, booster ports, USB port for updates and PC control port for additional infrared satellite, etc.
Precise control with clear red and green buttons: there are four remaining keys between the two knobs together with function keys. They are equipped in accordance with the usual turnout-panels alternately with red or green buttons and are usually used directly as a small solenoid control console for eight points, signals etc. served. The large graphic display can be seen just above the keys immediately at a glance the current setting position of magnetic products and in accordance with the shift position respectively activated keys are backlit. Of course, at any time more solenoid with the System Control can operate 7 - up to 320 with Motorola decoders and up to 2048 with DCC decoders. Finally, can be programmed with up to 24 switching operations also contain up to 80 routes. The 198 times 42 millimeters large full graphic display with 400 by 160 pixels is backlit high contrast and strong white. Above the name of the locomotive, the locomotive address and the currently selected driving gear or corresponding to the maximum speed of the locomotive converted current speed appears on the display. Thanks to the good display resolution and the catalog of stored KM1 models, a variety of available settings menus or CV programming of decoders are very clear and easy to use.
The new multi-protocol command station System Control 7 KM1 has the following performance features:
- Integrated 7 A Booster
- Included 180VA power supply
- 20V output voltage
- additional programming track output
- double-pedestal for simultaneous control of two locomotives
- grippy knobs for fine Geschwindikeitsregelung
- large high-contrast backlit full graphic display
- integrated accessory keyboard with 16 direct keys
- up to 2048 accessory switchable
- up to 80 routes can be programmed
- switchable depending Lokdecoder up to 32,768 special functions
- comfortable decoder programming
- data formats Motorola, DCC and Selectrix
- up to 128 steps
- alternative speed step or speed display
- double and multiple units
- model clock
- integrated infrared receiver for wireless handhelds IRIS (up to 10 m)
- up to four IRIS handheld controllers can be used simultaneously
- interface for up to two remote additional infrared receiver
- USB interface for PC software
- s88-feedback
- 3-pin and 5-pin booster interface
- two LocoNet ports for system extensions (including LISSY to Lokpositionserkennung,
cable speed controllers FRED, intelligent Booster Power 4 and Power 7)
- coupling of two system Control 7 via LocoNet (second system Control 7 is then used as
an additional control unit and a 7 amp Booster)
- up to the doubled output power and the differently designed housing identical to
the Intellibox II Uhlenbrock
-'Made in Germany' by Uhlenbrock
