This product does not have a specific scale associated with it. It will appear in our product lists regardless of what scale you have selected . Please check the description (if available) to ensure that it meets you needs.
Digital plus hand controller and the fast, reliable XpressNet™
Hand controllers are the typical input devices of the system, because manual operation is still the strongest application area of the digital control.
- the last selected locomotive address is immediately displayed in the display when plugged into the XpressNet again
- no restrictions on access to the locomotives, every radio hand controller on the XpressNet is on an equal footing
- all hand controllers have the option of switching switches
- the hand controllers can be removed and re-connected by the XpressNet during operation, if appropriate XpressNet sockets LA152 are installed
- the last selected locomotive address is immediately displayed in the display when plugged into the XpressNet again
- simultaneous use of up to 31 devices
- no restrictions on access to the locomotives, every hand controller on the XpressNet is on an equal footing
In addition, the XpressNet works bi-directional: You can also retrieve information from the controller: if you select a new locomotive, for example.B, its current speed, direction and condition of the functions are immediately taken over. You can continue seamlessly.
Hand controller LH01
The LH01 is a device for the XpressNet™, enjoy all the benefits of this fast system bus for the Digital plus system. This way, of course, you can put the LH01 on and off during operation, the last operated locomotive remains stored and can be controlled again immediately.
In addition, the XpressNet works bi-directional: You can also retrieve information from the controller: if you select a new locomotive, for example.B, its current speed, direction and condition of the functions are immediately taken over. You can continue seamlessly.
The LH01 at a glance
- finely graduated, precise rotary knob
- Election of the Club mode
- 9,999 addresses for digital locomotives
- Address "0" for an analog locomotive* Attention! Important note!
- Stack for quick selection of 12 freely selectable locomotive addresses
- in connection with the central LZV100/LZV200 up to 29 functions (F0 to F28) can be contacted in corresponding locomotive receivers
- any decoder function can be adjusted as a continuous or moment function
- Programming of the parameters of locomotive decoders on a separate programming track and on the main track (PoM)
- Switching option for up to 999 switches, signals, magnetic articles and other accessories
